Apollo 8p HELP!

Dailybasis3

New Member
Channel 1 on my Apollo 8p seems to be the only channel that's fully functional. I have 8 mics plugged in to record drums. Channel 1 works just fine. There's signal, I can do all the normal things like adjust the preamp level, plug in a condenser and use phantom power, etc.

The problem is channels 2-8. With (dynamic) mics plugged in, there will be the slightest bit of signal, but when I turn up the preamp level nothing happens. Speaking of nothing happening, if I try to use a condenser mic with +48V on any of those (2 through 8) channels there is absolutely no signal. Even when I crank the preamp level. Nothing. Additionally, if I plug a guitar into Hi-Z 2, nothing, while plugging it into Hi-Z 1 will leave me with no problems.

I've done the factory reset. I've tried different cables. I can't figure out how to resolve this and it's driving me crazy. Has anyone experienced this before? Please help! Much appreciated.

-J
 

Kcatthedog

Hall of Fame Member
Can you post some console screenshots, when you say 8 mics are they all the same mic ? Any possibility 2-8 are muted ? No plugs in involved ?
 
UAD Bundle Month
Top