Alternative power supplies for Apollo Twin USB

[jsdehlers]

Hi, I want to power my Apollo Twin from a Furman power conditioner I have on an outboard rack. The two-prong male plug (EU) won't fit and wanted to see if anyone has replaced the standard UA power supply with some other connection such as from other power source (as those used for guitar pedals that also provide 12V) UA's spec states that Apollo is 12V DC powered so expect if it provides enough amps it should work.
Thanks.

 

[LesBrown]

wanted to see if anyone has replaced the standard UA power supply with some other connection such as from other power source

H E L P ! ! Two apollo dead in less than 48 hours.

Apollo twin mk2 worked perfectly in the last 3 months. Was out of town. Came back and power on. It it came on then turned off. I checked the power supply and it is supplying 12 volts. When I turn the apollo on there is a flashing red light inside the unit I can see through the vent holes, but...

uadforum.com

 

[Neotrope]

you can use third party commodity power supply if it meets correct specs, but i would likely not do so if under warranty

https://help.uaudio.com/hc/en-us/articles/211649943-Apollo-Twin-Apollo-Twin-MkII-Power-Supply-Specifications-Purchase-Info

i am using replacement i got from sweetwater right now. all my gear runs into furman power conditioners.

 

[bellows and brass]

Hi, I want to power my Apollo Twin from a Furman power conditioner I have on an outboard rack. The two-prong male plug (EU) won't fit and wanted to see if anyone has replaced the standard UA power supply with some other connection such as from other power source (as those used for guitar pedals that also provide 12V) UA's spec states that Apollo is 12V DC powered so expect if it provides enough amps it should work.
Thanks.

if the option is available to use original equipment, do so.

Is it within your skill set to make a pro spec converter power cable?
alternatively just use a regular small extension cable with a pre made converter on the end. Tape it all together if need be.
im sure you are not the first person to want to convert power plug formats and one is probably available at your local shops.