-
Welcome to the General Discussion forum for UAD users! Please note that this forum is user-run, although we're thrilled to have so much contribution from Drew, Will, and other UA folks! Feel free to discuss both UAD and non-UAD related subjects! 1) Please do not post technical issues here. Please use our UAD Support Forums instead. 2) Please do not post complaints here. Use the Unrest Forum instead. They have no place in the the General Discussion forum. Threads posted in the wrong forum will be moved, so if you don't see your thread here anymore, please look in the correct forum. Lastly, please be respectful.
Anyone using PT7 with UAD-1?
- Thread starter bdangler
- Start date
precision limiter crashes PT7 on master insert
Everytime i tried it ,with no other plugins on the mater insert ,PT7 HD just POOF away.
I'll will try with other plugins later today,takes some time ,everytime i crash PT I have to reboot
G5 dual2ghz 3 gig ram Magma 64 7 slots HD4+1 UAD1.
I have the cards in this order in the Chassis:
1Core-2accel_1HD_1UAD1
I did not checked the AMD-8131 yet as i Had no issue with it before PT7
I'll try with it checked also
Francois
Everytime i tried it ,with no other plugins on the mater insert ,PT7 HD just POOF away.
I'll will try with other plugins later today,takes some time ,everytime i crash PT I have to reboot
G5 dual2ghz 3 gig ram Magma 64 7 slots HD4+1 UAD1.
I have the cards in this order in the Chassis:
1Core-2accel_1HD_1UAD1
I did not checked the AMD-8131 yet as i Had no issue with it before PT7
I'll try with it checked also
Francois
Demetrious
Active Member
This is alarming. What OS are you?
\"Pro Tools HD 7.0 is officially supported on Mac OS X 10.4.2 (Tiger)
Pro Tools HD 7.0 will not run on Mac OS X 10.3 and earlier
After updating either Pro Tools or your Mac OS, always run Disk Utility and \"Repair Permissions\" on the startup drive.\"
I got it to work ..kinda
The 3.8 plugins were duplicating the 4.0 as 4.0 install created it's own folder in the vst folder.Got rid of them and rewrapped the UAD PLUGINS.
Now I have this problem:
I can only have ONE UAD plugin working at a time.
Works on audio,aux and master insert but as soon as I insert a second one I have some white noise coming out of my mix.
The Uad meter registered around 25% so I have plenty of headroom left on the card.
I tried it with different plugins with the same resultrecision,plates,fairchild,cambridge..
I also tried to tick on/ off the AMD setting with no differences.
I did not touch the buffer yet.
Any suggestion on the buffer setting?
The cpu and pci meter in PT7 are very low in the 12% range.
Francois
G5 dual2ghz 3 gig ram Magma 64 7 slots HD4+1 UAD1.
I have the cards in this order in the Chassis:
1Core-2accel_1HD_1UAD1.
OSX 10.4.2
The 3.8 plugins were duplicating the 4.0 as 4.0 install created it's own folder in the vst folder.Got rid of them and rewrapped the UAD PLUGINS.
Now I have this problem:
I can only have ONE UAD plugin working at a time.
Works on audio,aux and master insert but as soon as I insert a second one I have some white noise coming out of my mix.
The Uad meter registered around 25% so I have plenty of headroom left on the card.
I tried it with different plugins with the same result
recision,plates,fairchild,cambridge..I also tried to tick on/ off the AMD setting with no differences.
I did not touch the buffer yet.
Any suggestion on the buffer setting?
The cpu and pci meter in PT7 are very low in the 12% range.
Francois
G5 dual2ghz 3 gig ram Magma 64 7 slots HD4+1 UAD1.
I have the cards in this order in the Chassis:
1Core-2accel_1HD_1UAD1.
OSX 10.4.2
I suggest you to full unistall any UAD-1 software and plug-in
and reinstall everything.
then wrapyour plugs-agan.
but, I think it's a wrapper issue because you are using plugs on aux
and master fader and as far as i know this is a new HD feature
isn't it?
I've heard that fxpansion is working on a new wrapper version
optimized for PT7 (with some great features)
and reinstall everything.
then wrapyour plugs-agan.
but, I think it's a wrapper issue because you are using plugs on aux
and master fader and as far as i know this is a new HD feature
isn't it?
I've heard that fxpansion is working on a new wrapper version
optimized for PT7 (with some great features)
What is the PT buffer size as well as the "block buffer size" setting the fxpansion adapter?francois said:I got it to work ..kinda
The 3.8 plugins were duplicating the 4.0 as 4.0 install created it's own folder in the vst folder.Got rid of them and rewrapped the UAD PLUGINS.
Now I have this problem:
I can only have ONE UAD plugin working at a time.
Works on audio,aux and master insert but as soon as I insert a second one I have some white noise coming out of my mix.
The Uad meter registered around 25% so I have plenty of headroom left on the card.
I tried it with different plugins with the same result
I also tried to tick on/ off the AMD setting with no differences.
I did not touch the buffer yet.
Any suggestion on the buffer setting?
The cpu and pci meter in PT7 are very low in the 12% range.
Francois
G5 dual2ghz 3 gig ram Magma 64 7 slots HD4+1 UAD1.
I have the cards in this order in the Chassis:
1Core-2accel_1HD_1UAD1.
OSX 10.4.2
I would suggest at least 256 in PT (512 preferably) and 256/512 for the block buffer size in the adapter. The lower buffer size in the adapter is to deal with HD's limited number of samples for delay compensation.