Apollo x8p 2 x ADA8200 Adat wired with each 8 Channels

[alexd0001]

Hi,

i have on my x8p two Adat In/Out and i would on both in each an ADA8200 from Behringer to get 16 additional ins - The problem is: only one of the ADA8200 comes in I/O Setup of Console to route it correctly with 8 Inputs/Outputs.

How do i setup it correclty - These is the setting which if done but i cant see the second device as Adat Ins/Outs.

thx for an answer

alex

 

[Matt Hepworth]

Hi,

i have on my x8p two Adat In/Out and i would on both in each an ADA8200 from Behringer to get 16 additional ins - The problem is: only one of the ADA8200 comes in I/O Setup of Console to route it correctly with 8 Inputs/Outputs.

How do i setup it correclty - These is the setting which if done but i cant see the second device as Adat Ins/Outs.

thx for an answer

alex

Correct. Apollo only supports 8 channels of ADAT. The second set is only for S/MUX.

 

[alexd0001]

and if i have a twin X with a seperate ADAT Link - can i set another 8 Channels to Adat on this one. I mean 8 on x8p and 8 on TwinX?

thx for speedrepeating

 

[Matt Hepworth]

and if i have a twin X with a seperate ADAT Link - can i set another 8 Channels to Adat on this one. I mean 8 on x8p and 8 on TwinX?

thx for speedrepeating

You can indeed!

 

[alexd0001]

Thank you - is it possible to have an softwareupdate in future to get this feature in x8p?

best regards - Alex

 

[Matt Hepworth]

Thank you - is it possible to have an softwareupdate in future to get this feature in x8p?

best regards - Alex

No, unfortunately this will always be limited to 8 ADAT inputs on all existing Apollos.