Apollo x8p ADAT Outputs

[m.Hoj]

Does anyone have a solve for this - unless I'm completely not understanding something.

I'm trying to get my ADAT outputs running.

I've ADAT ins and outs from my 2nd gen Scarlett 18i20 into my Apollo x8p. All the inputs are working, but I can seem to figure out how to get use out of the 10 outputs on my Scarlett. I have it ADAT, but I've been trying to understand how to route with console so that I can utilize those outputs for my needs.

Thank you in advance.

 

[Rainflower]

ADAT is 8 channels at 44.1 or 48kHz

 

[Rainflower]

x8p can do 8 channels in and 8 channels out using ADAT at 44.1 or 48kHz

 

[m.Hoj]

My inputs are working, my outputs are not. Unless I'm not understanding something in routing in console.

 

[Rainflower]

you want adat output from x8p to where?

 

[Matt Hepworth]

Remember that anything assigned in Console will make them unusable from the DAW. What're you hoping to achieve connecting the ADAT output to Focusrite?

 

[m.Hoj]

Problem was solved, I had to go into focurite console and change the line outputs to ADAT outputs. Everything is talking properly now.

Im utilizing the outputs on the Focusrite for stage monitors, headphone mix and any other potential output needs like reamping.