ARM not working in MIDI

terrydoylemusic

terrydoylemusic

Active Member
Hi All,

I chimed in on a LUNA 15.5 thread because I noticed that recently MIDI tracks are not getting low latency in LUNA.

I reset preferences, reinstalled UAD software and it finally seemed to resolve after a full system restart.

That was yesterday .. but today its back .. in the same session where it resolved yesterday.

So I downloaded 15.3 and the issue was still there .. so its not an issue with version 15.5 as far as I can see. There was a comment from Drew that ARM issues would not be LUNA, more likely UAD software. (I freshly reinstalled the latest yesterday)

So I created a brand new LUNA session and I have observed the following

1. Just having a single track for Ravel piano the midi latency is clearly low-latency with ARM on and a little bit more with ARM off
2. If I add a UAD plugin on a send and select it for ARM .. the effect does not work and the midi signal just gets louder as its passing through the send bus but without the reverb
3. If I turn ARM off now I can hear the reverb (with the latency acting as a kind of pre-delay)


I tested in Logic (been a good while since I used it as I only use LUNA now) and there were no latency issues or effect send routing issues.

I was wondering is there some diagnostics I can do on my Apollos? How does ARM actually work and what data can I gather to post here for further assistance.


EDIT: Support ticket 829730 raised
 
Last edited:
UniversalAudio

UniversalAudio

Official UA Representative
terrydoylemusic said:
Hi All,

I chimed in on a LUNA 15.5 thread because I noticed that recently MIDI tracks are not getting low latency in LUNA.

I reset preferences, reinstalled UAD software and it finally seemed to resolve after a full system restart.

That was yesterday .. but today its back .. in the same session where it resolved yesterday.

So I downloaded 15.3 and the issue was still there .. so its not an issue with version 15.5 as far as I can see. There was a comment from Drew that ARM issues would not be LUNA, more likely UAD software. (I freshly reinstalled the latest yesterday)

So I created a brand new LUNA session and I have observed the following

1. Just having a single track for Ravel piano the midi latency is clearly low-latency with ARM on and a little bit more with ARM off
2. If I add a UAD plugin on a send and select it for ARM .. the effect does not work and the midi signal just gets louder as its passing through the send bus but without the reverb
3. If I turn ARM off now I can hear the reverb (with the latency acting as a kind of pre-delay)


I tested in Logic (been a good while since I used it as I only use LUNA now) and there were no latency issues or effect send routing issues.

I was wondering is there some diagnostics I can do on my Apollos? How does ARM actually work and what data can I gather to post here for further assistance.


EDIT: Support ticket 829730 raised
Click to expand...
Reinstalling does nothing without the full prefs deletion.

this is the important part.
 
terrydoylemusic

terrydoylemusic

Active Member
UniversalAudio said:
anything on the master?
Click to expand...
Thanks for the support!

I have my MAIN bus clean and I use a set of groups (drums, bass, guitars) which goes in to MUSIC.
Then Vocals BV and MUSIC feed a final group (2 bus) which outputs to MAIN. 2-bus has a limiter (smart limit) and metricAB

But even manually disabling all plugins (UAD and Native) does not change the latency .. but then disabling the plugin processing using the bypass Inserts button does make the latency go away.

I also did a quick project in Logic using Console and there was no latency

[EDIT]: This is all in a template I have been using for months with no issues.

1714907672170.png
 
UniversalAudio

UniversalAudio

Official UA Representative
terrydoylemusic said:
Yes. Just tried that today actually ... and the issue continues.
Click to expand...
What has Support had you try?

This is a core function of the app/system and I am not seeing anyone else report any issues. So it's clearly a local thing, you just have to find it.
 
You must log in or register to reply here.
UAD Bundle Month
Top