Capital chambers disables in record mode

[MoMakkiMusic]

I have an x8, MKII, and an Octo, No way should my capital chambers reverb disable every time I hit record. I stepped the DSP up to 4 and increased buffer size to full capacity and none of that matters, still disables. Also, I’ve never had this issue till recently. Can anyone relate or possibly know what’s going on?

 

[Joe Porto]

What DAW?

 

[jonchristopherhughes]

that's pretty weird. i use it all the time when i'm tracking. i almost always have a stereo buss with capitol chambers going and a stereo parallel compression buss with a fatso or distressor for my drums.

i'm using LUNA, an apollo 16 quad and apollo 8 quad second gen.

i'll also often be printing or monitoring thru a bunch of other uad plugins as well. usually la2 and 1176 on guitars and bass, 176 on vocals, various things on the drums usually the api legacy strip. distressor on kick and snare.

what DAW are you using and is capitol chambers on a record enabled track when this is happening or being used on a buss.

is it just disabling while you are recording and then back on when you are playing back ?

 

[MoMakkiMusic]

What DAW?

Luna

 

[jonchristopherhughes]

do you have capitol chambers on a track in record or on an aux bus ?

if on a buss you have to make sure to select one of the two aux ARM paths for that buss. you get 2 stereo aux paths that will be active while recording that are low latency.

 

[MoMakkiMusic]

that's pretty weird. i use it all the time when i'm tracking. i almost always have a stereo buss with capitol chambers going and a stereo parallel compression buss with a fatso or distressor for my drums.

i'm using LUNA, an apollo 16 quad and apollo 8 quad second gen.

i'll also often be printing or monitoring thru a bunch of other uad plugins as well. usually la2 and 1176 on guitars and bass, 176 on vocals, various things on the drums usually the api legacy strip. distressor on kick and snare.

what DAW are you using and is capitol chambers on a record enabled track when this is happening or being used on a buss.

is it just disabling while you are recording and then back on when you are playing back ?

Luna, CC it’s on a bus, and it only disables in record, fine in playback. ARM is on, but this is what I’ve always done and never had issues. The x8 has always been able to handle it.

 

[MoMakkiMusic]

do you have capitol chambers on a track in record or on an aux bus ?

if on a buss you have to make sure to select one of the two aux ARM paths for that buss. you get 2 stereo aux paths that will be active while recording that are low latency.

Yep, my templates are set to arm that particular reverb.

 

[jonchristopherhughes]

hmm. that is very strange.

yeah a quad should handle that ok. especially if you've used it before.

is it possible that you somehow loaded the native spark version of capitol chambers rather than the UAD DSP version ?

 

[MoMakkiMusic]

hmm. that is very strange.

yeah a quad should handle that ok. especially if you've used it before.

is it possible that you somehow loaded the native spark version of capitol chambers rather than the UAD DSP version ?

No, I rarely use the x versions, I even tried the x version and get the same issue.

 

[MoMakkiMusic]

I even thought, that maybe it’s console, so I updated to the new version today, but I’m still getting the same thing.

 

[jonchristopherhughes]

that's very strange. sorry. not sure what else to try. it's very strange that it worked fine before.

generally when i have issues like this. i reboot, including my apollos...and sometimes i'll reauthorize my plugins just to make sure everything is good.

 

[UniversalAudio]

I have an x8, MKII, and an Octo, No way should my capital chambers reverb disable every time I hit record. I stepped the DSP up to 4 and increased buffer size to full capacity and none of that matters, still disables. Also, I’ve never had this issue till recently. Can anyone relate or possibly know what’s going on?

Is the Aux ARM enabled?

Is it in Slot 5 or higher?

 

[MoMakkiMusic]

@drewua

Is the Aux ARM enabled?

Is it in Slot 5 or higher?

its enabled and in slot 1

 

[UniversalAudio]

@drewua

its enabled and in slot 1

Hmmm....

PM me and we can do a Zoom if you like to have a look.

 

[MoMakkiMusic]

Thanks everyone at UA! they quickly got this resolved with a simple uninstall and re-instal, which not only fixed that but cleaned up my input/output section that was definitely due for an update. Thanks again guys!!