In Logic the audio tracked from my UA 4-710D line inputs clicks and pops when set to 24 bit, but not when set to 16 bit. I’m recording at 96k sample rate, I tried switching down to 44.1 and the problems were the same.
My chain:
Logic >
Apollo x8p >
4-710d (via adat)
World clock is all good, the x8p is my host and the 4-710d is set to receive w/c.
What’s strange is the 4-710d doesn’t click and pop from the 4 main preamps of the unit, only from the additional 4 line inputs on the back of the unit, and only in 24 bit.
Both logic and the unit are set to 24 bit. At 16 bit there are no issues. 44.1k sample it’s exactly the same, noises on 24, none on 16.
I should also add that I’m using all 16 inputs of this set up. 8 into the Apollo and 8 into the 4-710d.
My chain:
Logic >
Apollo x8p >
4-710d (via adat)
World clock is all good, the x8p is my host and the 4-710d is set to receive w/c.
What’s strange is the 4-710d doesn’t click and pop from the 4 main preamps of the unit, only from the additional 4 line inputs on the back of the unit, and only in 24 bit.
Both logic and the unit are set to 24 bit. At 16 bit there are no issues. 44.1k sample it’s exactly the same, noises on 24, none on 16.
I should also add that I’m using all 16 inputs of this set up. 8 into the Apollo and 8 into the 4-710d.
Last edited: