Console Monitor Mode Resets HELP!

[rosshc44]

Hey All,

I’m having a weird issue with console, under settings, my monitor mode is set to Stereo and bypasses the master output control straight to the SSL, but when the computer restarts, it resets to 7.1 as the monitor mode. This stops the Apollo from outputting directly to the SSL and I have to go in a manually reset it every time. Any ideas?

 

[Matt Hepworth]

Hey All,

I’m having a weird issue with console, under settings, my monitor mode is set to Stereo and bypasses the master output control straight to the SSL, but when the computer restarts, it resets to 7.1 as the monitor mode. This stops the Apollo from outputting directly to the SSL and I have to go in a manually reset it every time. Any ideas?

Do you have a single or multiple Apollos?

 

[rosshc44]

Do you have a single or multiple Apollos?

There’s 3 in the configuration.
2x x8p and 1 x16
The first x8p is the master with the output to the SSL.

 

[UniversalAudio]

Hey All,

I’m having a weird issue with console, under settings, my monitor mode is set to Stereo and bypasses the master output control straight to the SSL, but when the computer restarts, it resets to 7.1 as the monitor mode. This stops the Apollo from outputting directly to the SSL and I have to go in a manually reset it every time. Any ideas?

That should not happen. And it does not here. I have x16, two x8Ps, and a Twin and it always boots to where I last set it up.


Do a full uninstall/delete all prefs/reinstall

https://help.uaudio.com/hc/en-us/articles/360051069691--Mac-UAD-Uninstall-Reinstall-Procedure-?

 

[Matt Hepworth]

Deleting the prefs is probably the missing piece of the puzzle, but I wanted to see whether the order the devices connect (as they pop up after a restart) is always the same. Is it?