Fairchild/pultec problem

[sebastian1]

after changing my mac OS from 9.22 to OSx I have a problem
with the Fairchild 760 when inserting a Pultec pro afterwards.
As soon as I use the Pultecs on/off switch the signal distorts.
This remains even if I bypass or remove the Pultec Pi.
All other plug in combinations/chains work fine.
It happens on Audio tracks in Songs with host load approx. at 30-40%.(1 or 2 Audiotracks-24bit- and a few Audioinstruments)
It does not appear when using the built in audio drivers.
Changing the process buffer in logic has no effect.

As UA James already wasn't successful trying to reproduce this effect I am now looking
for someone with exactly the same setup:

G4 DP876, Logic 7, RME Hammerfall9652(not HDSP)-latest drivers, 1024 latency, OSX 10.3.5
(externally clocked at 44.1 from big ben.)
I'd really appreciate if you could check if this happens with your system, too.
Thanks,
Sebastian

 

[polygen]

first thing to try would be updating your os to 10.3.8 and lp to 7.01

 

[sebastian1]

thanks for your advice, but my Apple/pro audio dealer
explicitly told me NOT to update . They still have massive problems with OSX higher than 10.3.5 , espacially with G4s.
The logic update to 7.01 does not work with my spectrasonics PI's
wich are very important for me , too.

Again, anybody out there with a similar setup?

thanks,
sebastian

 

[giles117]

Although I Have LE7, i did the the 7.01 update and Stylus RMX and Trilogy work fine for me.

and I am running 10.3.8

 

[djdeejay]

thanks for your advice, but my Apple/pro audio dealer
explicitly told me NOT to update . They still have massive problems with OSX higher than 10.3.5 , espacially with G4s.
The logic update to 7.01 does not work with my spectrasonics PI's
wich are very important for me , too.

Again, anybody out there with a similar setup?

thanks,
sebastian

Running 10.3.8 and Logic Pro 7.0.1 here and all Spectrasonics instruments are running fine here.

 

[sebastian1]

Ok, You encouraged me to dare the upgrade, (UAD 3.8, Logic 7.01, OSX 10.3.8).
Everything works fine, but didn't change the Fairchild/Pultec issue...

I've given up hope for resolving it, I'll get a G5 in the near future,anyway.