help needed uad1 SAM pro 8.31 & FIREFAcE 800

[hollybaba]

i have an asus a8v deluxe
amdx2 poco
ati radeon 9600
2 go DDR
sampro 8.31

uad1 in slot 2&3
firewire in slot4
each with it s own irq
when i scroll on the sam main window i have gltich's n pop
asio error even with 1024 buffer
i sometime have uad1 cards warning with only 2 plugs
i ve tryed to use pci tool but no succes
my bios is the latest asus all the drivers are up to date
the uad1 card somtimes freez my cpu more thane 100%
in sam meter
please if u can help
:roll:

 

[boody]

the ati uses a high pci setting; maybe you can lower it using the pci tool. Try set everything _but_ the fireface to 32 and see what happens. Glitches while using the interface often are related to your graphic card.

There are loads of things you can try to make it better, and there's always something that works. Try to understand what happens and experiment with actions against that. Try using a smaller monitor resolution and see what happens, change uads pci-min setting and see what happens, disable some of the fireface's in/out and see what happens... etc etc etc


goodluck
Budy

 

[hollybaba]

thanx for reply

seem s better with lowering the buffer size
wich video card should i use ?
do i have to set the video card to 64 ? in latency tool
i can run the samp 2004 demo with not more than 50 % of the cpu
even with full 2 uad card at 94 %
but when i start moving the handels for zooming i have some asio errors

 

[jaded]

same video card, same samp, same symptoms, haven't adjusted pci setting yet, only happens when scrolling using zoom etc..
i've actually just got a pci soundcard from a 828mkii for a few reasons, but this problem might be the video card (or/with samp)
joe

 

[hollybaba]

better doing pci latency
# Audio device [248]
# Audio DSP cards (all should be the same) [64 or 128]
# Audio hard drive controller [48 or 64]
# System BIOS [32 to 64]
# Everything else [32]

no acceleration on video card no fast writing
it s better :lol: