Little help with a LUNA Panning Issue on a Stereo Track

[swaite]

I'm having difficult panning a stereo track up the center (it's a bass guitar track recorded with the Helix via SPDIF).

I used to be able to just set the L and R pans up the center - dead simple! - but the latest version of LUNA won't let me.
When I move the Left pan to the Center the R pan goes full R and when I set the R pan to Center, the Left pan goes to full L. (see attached screenshots)

I can't figure out what's going on. Never had this issue before.

Anybody else encounter this oddity?

 

[LesBrown]

Sounds similar to this issue, maybe same resolution?

Strange Luna Panning Issue - No Right Side Pan

I'm working on a session and noticed that anything I panned to the right just simply went into the center of the speakers. I soloed a mono scratch vocal and sure enough, if I pan to the left the sound hard pans as expected, but if I pan to the right I am getting signal out of both speakers and...

uadforum.com

 

[swaite]

Yes, thank you!

Somehow the SSL Channel strip I was using got messed up.

All good now!

 

[AlexR]

I'm having difficult panning a stereo track up the center (it's a bass guitar track recorded with the Helix via SPDIF).

I used to be able to just set the L and R pans up the center - dead simple! - but the latest version of LUNA won't let me.
When I move the Left pan to the Center the R pan goes full R and when I set the R pan to Center, the Left pan goes to full L. (see attached screenshots)

I can't figure out what's going on. Never had this issue before.

Anybody else encounter this oddity?

i'm assuming the signal is the same on both left and right? or do you have stereo effects on the bass?
you can either right click on the pan pot and switch the panning type, or of the bass is mono just convert the track to mono

 

[swaite]

i'm assuming the signal is the same on both left and right? or do you have stereo effects on the bass?
you can either right click on the pan pot and switch the panning type, or of the bass is mono just convert the track to mono

Thanks, bro! Much appreciated.