LUNA: No audio input signal beyond track 1

[Philip Aiello]

Ciao ciao,

I'm not receiving any audio input signal beyond the first track in LUNA recordings/sessions. I use the Apollo Twin Duo Mkii and currently have my guitar amp mic'ed and connected via MIC/LINE/HZ 1 and all other tracks are loaded as that input signal option. But only receiving volume from track 1. And I have turned the recording active and tried the input monitoring. Any help much appreciated!

 

[AlexR]

Ciao ciao,

I'm not receiving any audio input signal beyond the first track in LUNA recordings/sessions. I use the Apollo Twin Duo Mkii and currently have my guitar amp mic'ed and connected via MIC/LINE/HZ 1 and all other tracks are loaded as that input signal option. But only receiving volume from track 1. And I have turned the recording active and tried the input monitoring. Any help much appreciated!

Buon Giorno e Buona Pasqua

If you have a Twin you have only 2 inputs unless you are using an ADAT cable to connect to another interface/AD converter.

So if you are trying to record more than 1 track at the time, the 2nd track input should be set to channel 2 of the Twin, since input one its obviously taken by your miced guitar amp.

If by "I'm not receiving any audio input signal beyond the first track in LUNA recordings/sessions" you actually meant any additional created track with the input set to 1 do not receive audio, than might be time to send a support ticket in.

Just in case make sure the the first track is not in record or in input monitoring, you can only monitor the same input once, you cannot have multiple track with the same input all set to record or input monitoring.

 

[Philip Aiello]

Buon Giorno e Buona Pasqua

If you have a Twin you have only 2 inputs unless you are using an ADAT cable to connect to another interface/AD converter.

So if you are trying to record more than 1 track at the time, the 2nd track input should be set to channel 2 of the Twin, since input one its obviously taken by your miced guitar amp.

If by "I'm not receiving any audio input signal beyond the first track in LUNA recordings/sessions" you actually meant any additional created track with the input set to 1 do not receive audio, than might be time to send a support ticket in.

Just in case make sure the the first track is not in record or in input monitoring, you can only monitor the same input once, you cannot have multiple track with the same input all set to record or input monitoring.

Grazie mille, fratello.