Mono audio panned 100% right still faint in left speaker

[DaveNJ]

Not sure what's going on here - I'm building some backing tracks with clicks in the right speaker and the audio in the left but I noticed tonight that there is some faint click audio coming out the left side. It doesn't show in Luna's output meter, but it's there. I created a new track and just recorded a mono voice and panned it hard right and I can still hear it coming out of the left speaker - again, super faint.

After mix down, there is audio from those right track sin the left channel.

For shits and giggles, I tried it in logic and the left channel is completely silent.

What could I be missing?

 

[Matt Hepworth]

Headphone bleed or guitar pickup...er..pick up possible?

Exact same tracking scenario in Logic?

 

[DaveNJ]

I found it - it's the ATR-102 on MAIN. Disabling that, stops the crosstalk.

Is there a way to access that setting when it's in the TAPE slot? When I disabled it there and added it as an insert, I was able to go in and turn it off:

 

[DaveNJ]

I never realized the default ATR-102 setting has that crosstalk on - but, I never really created these backing tracks before where each side has to be "clean"...