I've finally got my dual-core Opteron system up and running but I am noticing some considerable munching with my two UAD-1 cards running plugins in Sonar 5.0.
When my latency is set at 11.6ms (512 ASIO buffer size) I can only run my two UAD-1's to about 55-60% on the UAD-1 performance meter. At the same time, Sonar 5.0's cpu meter hovers around 25-35%.
I had done a lot of reading about UAD-1 cards in Tyan's K8W (S2885) and was optimistic in reading results if munching as low as 3-5%. I could live with that but really can't do much with my current setup. Are there any tips or tricks to cut down on the munching?
Thanks,
Nightowl
When my latency is set at 11.6ms (512 ASIO buffer size) I can only run my two UAD-1's to about 55-60% on the UAD-1 performance meter. At the same time, Sonar 5.0's cpu meter hovers around 25-35%.
I had done a lot of reading about UAD-1 cards in Tyan's K8W (S2885) and was optimistic in reading results if munching as low as 3-5%. I could live with that but really can't do much with my current setup. Are there any tips or tricks to cut down on the munching?
Thanks,
Nightowl