Problem with 3UAD-1 and Cubase SX2???

[denixx]

hi, i have 3 UAD-1 and when i open project with Cubase Sx2 , i have many errors on my FF800 Panel???
if i unselect the third Card its ok.....no error
i tried all possibilty...pci slot..etc...if i run with 2 cards its ok.

helppp me

tks

DeNiXx


ps: my FF800 is with firewire800 card..
-----------------
Asus Pc-dl Deluxe/2Dual Xeon 2,4/4G DDR400/Ati Radeon 9600XT/2x17\"Monitors/Antec450/XP Pro/SX2/
2HD IDE/2 SATAII/FF800/Octamic D/Aphex 1100/3XUAD-1/Avalon 747sp/Amek9098/DynAudio BM15A/YamahaNs10...

 

[Akis]

Are you on WinXP? What's your userva=???? in your boot.ini file? I found when I added my third UAD that I had to lower from 2900 to 2800 in order for it to work (and down to 2700 for my 4th card). Could be irrelevant, though.

 

[denixx]

win Xp sp1 yes...i ll cheke tonight

Tks

DeNiXx

 

[denixx]

With 3 cards...

Tks

DeNiXx


---------------
Asus Pc-dl Deluxe/2Dual Xeon 2,4/4G DDR400/Ati Radeon 9600XT/2x17\"Monitors/Antec450/XP Pro/SX2/
2HD IDE/2 SATAII/FF800/Octamic D/Aphex 1100/3XUAD-1/Avalon 747sp/Amek9098/DynAudio BM15A/YamahaNs10...[/img]

 

[imdrecordings]

win Xp sp1 yes...i ll cheke tonight

Tks

DeNiXx

I don't know if this makes a difference, but I'm pretty sure that you need Service Pack 2 for FW800.
ALSO:
Your power supply , might not be powerful enough, to power the third card. Along with everything else in your PC.

Another thing:
Why are you using "All Channels" in the Limit Bandwidth field? If you don't have anything else hooked up, but the FF800 and Midi. Select only channels 1-8. You will see an increase in the sound quality.

What FW800 card do you have?
Have you tried 1024, for your buffer setting? When using the 3rd card.

I'll report back, if any other ideas come to mind..

 

[Akis]

Denixx, how are you using your 4GB of RAM without the 3GB switch in boot.ini?

 

[denixx]

http://www.rme-audio.com/english/techinfo/fw800sp2.htm

i agree with U :? , i ll runnn update SP2 lol

And i ll change my Limit Bandwidth!!!!

Tkss

DeniXx

-----------------
Asus Pc-dl Deluxe/2Dual Xeon 2,4/4G DDR400/Ati Radeon 9600XT/2x17\"Monitors/Antec450/XP Pro/SX2/
2HD IDE/2 SATAII/FF800/Octamic D/Aphex 1100/3XUAD-1/Avalon 747sp/Amek9098/DynAudio BM15A/YamahaNs10...

 

[denixx]

i don't know akis....i just tested with Cpuz=4G...(3,8)
But in bios i have 2,8 with 3 cards...2,4 with 2 cards.....

where is the true?


DeNiXx

 

[imdrecordings]

Denixx, how are you using your 4GB of RAM without the 3GB switch in boot.ini?

Akis,
Is there a thread here, showing how to do that? hmmm..
I'd like to give it a try.

 

[Akis]

See here:

http://www.nuendo.com/phpbb2/viewtopic. ... b+ram+boot

 

[denixx]

i tried this my Cubase SX .....but crash

i ll try SP2 8)

DeNiXx

 

[denixx]

win Xp sp1 yes...i ll cheke tonight

Tks

DeNiXx

I don't know if this makes a difference, but I'm pretty sure that you need Service Pack 2 for FW800.
ALSO:
Your power supply , might not be powerful enough, to power the third card. Along with everything else in your PC.

Another thing:
Why are you using "All Channels" in the Limit Bandwidth field? If you don't have anything else hooked up, but the FF800 and Midi. Select only channels 1-8. You will see an increase in the sound quality.

What FW800 card do you have?
Have you tried 1024, for your buffer setting? When using the 3rd card.

I'll report back, if any other ideas come to mind..

i have Adaptec FireConnect 8300 card

DeniXx