• Welcome to the General Discussion forum for UAD users!

    Please note that this forum is user-run, although we're thrilled to have so much contribution from Drew, Will, and other UA folks!

    Feel free to discuss both UAD and non-UAD related subjects!

    1) Please do not post technical issues here. Please use our UAD Support Forums instead.

    2) Please do not post complaints here. Use the Unrest Forum instead. They have no place in the the General Discussion forum.

    Threads posted in the wrong forum will be moved, so if you don't see your thread here anymore, please look in the correct forum.

    Lastly, please be respectful.

problems with new neve 33609

L

lowrenzo

Member
hello folks,
i have some problem with my neve compressor,

when i start a project and open some plugs ( i own 4 cards ) and every card has about 40%!! i am not able to start up a neve 33609!

althought i have so much cpu power left.. (240%) i can not load that plug in because my system has too much load on the UAD Cards.

dear UA
is it possible to implement a type of intelligent recource swapping for such reasons..
i hope there will be some feedback, because when you offer such heavy compressors, it should be possible to load such unit with 4 cards when having enough power free..

greets low
 
D

DBS

Member
Same problem here... :cry:
A temporary solution is to turn of and on the Card in the UAD-1 Meter.
Or turn of the plugins and start with the neve...
 
RWIL

RWIL

Established Member
You can also read about that here:
http://www.chrismilne.com/uadforums/vie ... php?t=5453

I face again today the same. Try to reopen a project which was working fine on save, and now getting the 33609 disabled. It was a pre-mastering project with only few plugs and plenty of room within my 2 cards.
I hope that a solution could be possible using the actual tech, because the second card I bought few weeks ago give me nothing in those situations...
[-o<
 
You must log in or register to reply here.
UAD Bundle Month
Top