Project Causes External Drives To Eject

N

nikoli

Active Member
I have one particular project that is causing some odd behaviors.

All other projects work normally.

When I open the problem project, I can do nothing in Luna, and after about 15 seconds or so... I get a Mac OS notification stating Disk Not Ejected Properly on my Time Machine drive... then another 30 seconds or so... I get a notification that my Recording drive did not eject properly.

Both are external drives. The recording drive is home to this project (and all others).

After a couple minutes of Luna being locked up it tells me the session is missing... obviously because the drive/volume is no longer mounted.

Idk what it is about this project. There's nothing unusual about it. No plugs or instruments being used that aren't also in other working projects.

Any suggestions welcome!
 
N

nikoli

Active Member
So as I went to zip the project file to upload to support, I experienced the issue again with drives disconnecting.

After some trial and error, I wound up figuring the project file itself was likely corrupted in some way that was causing the OS to freak out and dismount the drives.

I was able to restore a backup from Time Machine and all seems to be working well at present.

Sooooo... long story short... drive/file issue, not a Luna issue.
 
You must log in or register to reply here.
UAD Bundle Month
Top