Roland PC-200

rearle

New Member
I am having a problem using an old Roland PC-200 mkII with Luna. Luna doesn't see it. Any suggestions?
 

Rainflower

Venerated Member
are you using a mac? set up your midi interface in audio midi…

i’m not sure what to do on a pc. it’s been years since I used one…
 

rearle

New Member
Yes I am using a Mac Actually exactly like yours. I just have 32GB RAM though. I have an old MOTU MIDI Express 128. I am just using Ch.1. The PC-200 OUT goes to the MOTU with the USB from the MOTU to Mac mini. The MOTU ch. 1 light blinks but, in MIDi or Controller in Luna nothing shows up. Thank you for your response.
 

Rainflower

Venerated Member
Yes I am using a Mac Actually exactly like yours. I just have 32GB RAM though. I have an old MOTU MIDI Express 128. I am just using Ch.1. The PC-200 OUT goes to the MOTU with the USB from the MOTU to Mac mini. The MOTU ch. 1 light blinks but, in MIDi or Controller in Luna nothing shows up. Thank you for your response.
so then in the AMS (Audio Midi Setup) on the mac you should create and ‘connect’ the keyboard to the 128…with the virtual cables. then you should see the pc200 as a midi input…if you want you can pm me and i can show you over a video chat…
 

rearle

New Member
Thank you for your kind offer. I have managed to find and futz with the AMS this evening. I downloaded a driver for the Express 128. I am struggling and still haven't got it to work... It's getting late here so I will knock off for tonight and try again tomorrow. If I can't get it to function I would really appreciate a video chat. I have FaceTime, WhatsApp and Zoom. The PC-200 is just a keyboard real simple with 1 midi out. basta.
 

Rainflower

Venerated Member
Oh yeah, i assumed that you had already installed the MOTU driver for the 128. I can help just pm me a time you would like to go over it.

I have a pc200mkii and a 128…so i can walk you through it..
 

rearle

New Member
I am afraid I will need you to walk me through it. I have everything up I think but, I can't draw the cable connections. I am in Switzerland so I am 6 hours ahead EST. I have tomorrow completely free and Tuesday is also free. Thank you very much for your help.
 

Rainflower

Venerated Member
I am afraid I will need you to walk me through it. I have everything up I think but, I can't draw the cable connections. I am in Switzerland so I am 6 hours ahead EST. I have tomorrow completely free and Tuesday is also free. Thank you very much for your help.
add 3 hours to that i’m on the west coast usa. PST

I might be able to help you at 6am-7am your time today…you are probably already getting ready for bed…if you get this message…I’ll pm you my contact phone..face time me in your early morning…(?)
 
UAD Bundle Month
Top