Shure SM7B Presest #7-12

[JFerro]

Greetings

I hope this message finds everyone well.

I am missing Shure SM7B presets #7-12. I've searched the internet (Both Shure and UAD sites) and can't find where to get them.

Any suggestions or advice? Thanks in advance.

Jose

 

[UniversalAudio]

Greetings

I hope this message finds everyone well.

I am missing Shure SM7B presets #7-12. I've searched the internet (Both Shure and UAD sites) and can't find where to get them.

Any suggestions or advice? Thanks in advance.

Jose

Here you go!

 

[JFerro]

Here you go!

Thank you!

 

[JFerro]

Hi Drew

I hope you can help me.

After receiving these additional presets, I noticed that I didn't have certain plug ins.
They were the V76 preamp, Fairchild Tube Limiter and the Teletronix LA-3A Classic Audio Leveler.

So I went to the UAD site and purchased them.

When I went to UA Connect to activate and download the plug ins, only two were there,
the Fairchild and the LA-3A. Not the V76

When I contacted UAD I got this message from them.

Hello Jose,

Thank you for contacting Universal Audio. I hope you are keeping safe and well!

Not all UAD plug-ins have been ported to native/UADx format. The V76 is only available as a UAD-2 DSP plug-in.

We do plan to port over more UAD plug-ins, but this will take time as you can imagine.
Our developers have not given us any info on which plug-ins will be ported or when, but you will receive an email notification with each UADx plug-in release.
You can see the current list of available UADx plug-ins here: Which UAD plug-ins are available natively and in UAD Spark?

Let me know if you need any further clarification.

Best Regards,

Customer Care
Universal Audio

I've emailed them again but have not heard anything.



The issue is that I can see and use the Fairchild and The LA-3A in the UAD-X files But NOT in my Apollo Twin Quad.
The V76 doesn't show up anywhere.

Did I just spend money on something I can't use in my Apollo?

Any insight would be appreciated

Best Regards
Jose

 

[UniversalAudio]

Hi Drew

I hope you can help me.

After receiving these additional presets, I noticed that I didn't have certain plug ins.
They were the V76 preamp, Fairchild Tube Limiter and the Teletronix LA-3A Classic Audio Leveler.

So I went to the UAD site and purchased them.

When I went to UA Connect to activate and download the plug ins, only two were there,
the Fairchild and the LA-3A. Not the V76

When I contacted UAD I got this message from them.

Hello Jose,

Thank you for contacting Universal Audio. I hope you are keeping safe and well!

Not all UAD plug-ins have been ported to native/UADx format. The V76 is only available as a UAD-2 DSP plug-in.

We do plan to port over more UAD plug-ins, but this will take time as you can imagine.
Our developers have not given us any info on which plug-ins will be ported or when, but you will receive an email notification with each UADx plug-in release.
You can see the current list of available UADx plug-ins here: Which UAD plug-ins are available natively and in UAD Spark?

Let me know if you need any further clarification.

Best Regards,

Customer Care
Universal Audio

I've emailed them again but have not heard anything.

The issue is that I can see and use the Fairchild and The LA-3A in the UAD-X files But NOT in my Apollo Twin Quad.
The V76 doesn't show up anywhere.

Did I just spend money on something I can't use in my Apollo?

Any insight would be appreciated

Best Regards
Jose

All of them will show up in Console or in your DAW.

UAD DSP plugins in the UAD category, and the native plugins in the UADx one.

Be sure they're not hidden in Console.

 

[JFerro]

The Plug Ins show up in my DAW (Logic) under the UAD-X folder EXCEPT the V76

In the UAD folder (within Logic and Console) all the plug ins show up but, when I try to use them, it says I can DEMO or Buy.

In the Console (Legacy, I can't find the plugins list in the NEW version of Console) all the plug ins are NOT hidden.

 

[UniversalAudio]

The Plug Ins show up in my DAW (Logic) under the UAD-X folder EXCEPT the V76

In the UAD folder (within Logic and Console) all the plug ins show up but, when I try to use them, it says I can DEMO or Buy.

In the Console (Legacy, I can't find the plugins list in the NEW version of Console) all the plug ins are NOT hidden.

I'd re-run the UAD installer.

 

[JFerro]

Hi Drew

After reading a post on this forum, I went to the Console Meter & Control Panel. I did the authorization for the plugins there.

It now works.

Thanks for all your help

 

[grimfrog]

Here you go!

Hi Drew,

Is it possible to get the first 6 channel presets also posted here?

Thanks!

 

[UniversalAudio]

Hi Drew,

Is it possible to get the first 6 channel presets also posted here?

Thanks!

they should be in UAC now.

https://help.uaudio.com/hc/en-us/articles/4418708764180-FAQ-SD-1-Dynamic-Microphone-with-Hemisphere-Modeling

 

[doge]

Greetings

I hope this message finds everyone well.

I am missing Shure SM7B presets #7-12. I've searched the internet (Both Shure and UAD sites) and can't find where to get them.

Any suggestions or advice? Thanks in advance.

Jose

hello

Where can I get sm7b presets 1-6?

 

[grimfrog]

they should be in UAC now.

https://help.uaudio.com/hc/en-us/articles/4418708764180-FAQ-SD-1-Dynamic-Microphone-with-Hemisphere-Modeling

Thanks Drew, but I believe the presets are only available for download if you own a SD-1 mic. I own a Sphere LX and there are no additional downloads visible for me.

 

[UniversalAudio]

Thanks Drew, but I believe the presets are only available for download if you own a SD-1 mic. I own a Sphere LX and there are no additional downloads visible for me.

yeah, they're designed for that mic, so that makes sense.