• Welcome to the General Discussion forum for UAD users!

    Please note that this forum is user-run, although we're thrilled to have so much contribution from Drew, Will, and other UA folks!

    Feel free to discuss both UAD and non-UAD related subjects!

    1) Please do not post technical issues here. Please use our UAD Support Forums instead.

    2) Please do not post complaints here. Use the Unrest Forum instead. They have no place in the the General Discussion forum.

    Threads posted in the wrong forum will be moved, so if you don't see your thread here anymore, please look in the correct forum.

    Lastly, please be respectful.

Thunderbolt Apollo X8 - Callibrated at -16dbfs or -18dbfs?

loupap

New Member
Does anyone know if the Apollo X series converters are callibrated at -16dbfs or at -18dbfs?

Thanks
 

Nyoak34

Established Member
Does anyone know if the Apollo X series converters are callibrated at -16dbfs or at -18dbfs?

Thanks
There is a Headroom setting where you can select +20 or +24dbu.

From the manual:

Headroom (Apollo X rack models)

Headroom sets the maximum analog signal level for the line inputs, line outputs, and monitor outputs of connected Apollo X rack models. The available values are +20 dBu (the default value) or +24 dBu.

+24 dBu operation is typically used when interfacing with professional audio equipment such as large format consoles, analog tape machines, and similar devices that require higher analog I/O signal levels.
 
UAD Bundle Month
Top