Page 11 of 16 FirstFirst ... 789101112131415 ... LastLast
Results 101 to 110 of 152
Like Tree88Likes

Thread: Welcome to the UAD v9.3 Official Q&A with GK!

  1. #101
    Up and Comer
    Join Date
    Mar 2017
    Posts
    9
    Mentioned
    0 Post(s)
    Agreed! Adding various 3rd party IRs are essential to the success of amp plugins . Seems like a complete afterthought for most amp plugin makers. Silly . There are some good 3r party plugins for loading & buying IRs, like Two Notes Wall Of Sound. But I would much prefer to stay in the UAD platform. And frankly, they should create or resell a whole library of speaker IRs, right? Pick the best out there and package them up. Two Notes, Celestion, Michael Britt, and whoever else.

    What do you think?

  2. #102
    Up and Comer
    Join Date
    Mar 2017
    Posts
    9
    Mentioned
    0 Post(s)
    Hi Matt

    Can you explain about the limits of IR's? Maybe i am misinformed, but I thought they were suppose to be accurate representations of how the amp interacts with the particular speaker. Kind of like the way the Ocean Ways reverb works, although that enables mike modeled placement close, far, etc. The Two Notes Wall OF sound has Mike re-placement close, off center , middle of room, etc. Of course there are mic models , but several cabs i have played with sound great. Like Vox 30 2 x12 , Blues Delxue 1x12, Blond Showman . THese are all driven by your real amp, somewhat similar to how the UAD "OX " may work .

    Thanks

  3. #103
    Master of the UADiverse Matt Hepworth's Avatar
    Join Date
    May 2005
    Location
    UT, USA
    Posts
    6,510
    Mentioned
    8 Post(s)
    An impulse can reproduce a single, linear sound accurately. It can't however, reproduce anything that is non-linear. This includes saturation, modulation, speaker breakup, preamp coloration that involves any kind of saturation, any kind of dynamic change, and so forth.

    A speaker doesn't react in a linear way. Convolution cannot capture that. However, even linear convolution provides a representation that can still be hard to distinguish from the real version under some circumstances.

    For example: a high wattage guitar speaker mic'd with an Earthworks measurement mic, and run into a Grace preamp to a Prism converter will be difficult to distinguish from its convolution reproduction. On the other hand, that same source through a Greenback that's breaking up a little, mic'd with a MD1, run into a V72, recorded to tape will be much easier to distinguish the real from the IR. The IR won't have any of the speaker breakup, none of the slight saturation of the MD1, none of the the natural tube compression and drive of the V72, nor any of the natural transient attenuation of the tape. It will have the same EQ curve of that chain, but none of the life or non-linear things that make it great.

    Quote Originally Posted by jwalker9999 View Post
    Hi Matt

    Can you explain about the limits of IR's? Maybe i am misinformed, but I thought they were suppose to be accurate representations of how the amp interacts with the particular speaker. Kind of like the way the Ocean Ways reverb works, although that enables mike modeled placement close, far, etc. The Two Notes Wall OF sound has Mike re-placement close, off center , middle of room, etc. Of course there are mic models , but several cabs i have played with sound great. Like Vox 30 2 x12 , Blues Delxue 1x12, Blond Showman . THese are all driven by your real amp, somewhat similar to how the UAD "OX " may work .

    Thanks
    Myramyd and ThomasM like this.
    PTHD> 2x Pro Tools HD4 Accel | 2x Mac Pro 8 Core (16 thread) | 2x Magma Chassis | Apogee Symphony I/O, AD16X, and AVID HD I/O | 2x UAD-2 OCTO, Solo | Pro Tools HD 10, HD 12 | Studio One V3 Pro | OSX 10.8.5

    NATIVE> nMP Ashtray/Trashcan Hex Core | OSX 10.10.4| Windows 8.1 Pro | Apollo QUAD "Classic" w/ TB, Apollo Twin DUO | TC Konnekt 48 | Samplitude Pro X | Studio One V3 Pro | SONAR Platinum | Pro Tools 12

  4. #104
    Moderator DanButsu's Avatar
    Join Date
    Jul 2012
    Location
    Montreal, Canada
    Posts
    4,359
    Mentioned
    1 Post(s)
    Quote Originally Posted by UniversalAudio View Post
    Hi Clayton,

    Thanks and welcome to the Forums!

    The UAD platform doesn't support external side-chaining at this time.

    It is a very popular request, but it is not on the imminent horizon.

    Cheers!

    -GK
    Gannon Kashiwa
    Hi Gannon. I do see the SC functions on the UAD release of the Oxford Dyn EQ. Are you saying the SC feature is not active on the UAD version of the dynamic eq? Cheers, Dan
    Apollo QUAD Silverface TB | Satellite QUAD FW | UAD v9.2 | Mac mini 2011 i7 Quad Sever | OS X 10.8.5 | Pro Tools 12.5.2 | Studio One 3.5 Pro | Harrison Mixbus 32C v4 | Amphion one18 driven by a Vecteur A6 HiFi Amp | Adam Sub10 | Subpac M2 | 32-Channel Soundcraft Ghost | Sony APR5003v 1/4" two-track Reel to Reel | Roland RE-200 Space Echo | Sample of my work: dansoundsmith - Soundcloud

  5. #105
    Experienced UAD User
    Join Date
    Jun 2008
    Posts
    267
    Mentioned
    0 Post(s)
    Quote Originally Posted by DanButsu View Post
    Hi Gannon. I do see the SC functions on the UAD release of the Oxford Dyn EQ. Are you saying the SC feature is not active on the UAD version of the dynamic eq? Cheers, Dan
    no external side-chain as for all UAD plugins ... internal side-chain should be available as with some other plugs on the platform
    hope that helps

  6. #106
    Up and Comer
    Join Date
    Nov 2016
    Posts
    15
    Mentioned
    0 Post(s)
    Quote Originally Posted by UniversalAudio View Post
    Hey Jonschmitz,

    There are 9 new programs in RMX16 Expanded, but the functionality is identical to the RMX16. Note that when you get v9.3, there are now two versions - RMX16 and RMX16 Expanded. They use different plug-in IDs so presets and session compatibility are maintained, but you can't load Expanded presets into the original and vice versa.

    Definitely check it out though because the new programs widen the palette substantially.

    I don't know if you guys were around when the RMX16 was in production, but I was and the studio I worked at had the barcode reader and extra sheet. Amazing technology (when it worked!).

    Cheers!

    -GK
    Gannon Kashiwa
    Hi Gannon: Could you please pass along the request to make the RMX16 presets compatible for the RMX16 Expanded? The Expanded version has all of the original programs and functionality so I don't see why this shouldn't be possible. Right now, if I want to browse through all RMX16 presets (which I like to do), I have to load an instance of each plugin and go back and forth - having both sets of presets available in one unit would be so much more handy and better for the workflow.

    Thanks - Billy
    Toneranger likes this.

  7. #107
    Up and Comer
    Join Date
    Aug 2017
    Location
    Washington, DC
    Posts
    2
    Mentioned
    0 Post(s)
    Has anyone had any problems with the new v9.3 update? I've never had any problems in the past with updates, been using UAD plugin's and software for about 10 years. with this new update I can't get it to load and it removed the v9.2 so my system has been down for the last 2 days. I'm kind of concerned as I work mostly these days on weekends and evening EST. and tech support is only available for phone contact during office hours of my days job. UAD responded email with some possible solutions but they didn't work. I'm using an Apollo 8 with a couple more satellite quad units, a windows custom built computer (Gigibyte Z170X-ultra gaming mother board) with windows 10 Professional with latest update from windows which according to UAD site should be good. also using the Startech thunderbolt adapter #TBT3TBTADAP. Which has been working perfectly for the last 7 months or so. Using Cubase 9 Pro. Any help from anyone would great!!

  8. #108
    Master of the UADiverse Matt Hepworth's Avatar
    Join Date
    May 2005
    Location
    UT, USA
    Posts
    6,510
    Mentioned
    8 Post(s)
    What error are you seeing?
    PTHD> 2x Pro Tools HD4 Accel | 2x Mac Pro 8 Core (16 thread) | 2x Magma Chassis | Apogee Symphony I/O, AD16X, and AVID HD I/O | 2x UAD-2 OCTO, Solo | Pro Tools HD 10, HD 12 | Studio One V3 Pro | OSX 10.8.5

    NATIVE> nMP Ashtray/Trashcan Hex Core | OSX 10.10.4| Windows 8.1 Pro | Apollo QUAD "Classic" w/ TB, Apollo Twin DUO | TC Konnekt 48 | Samplitude Pro X | Studio One V3 Pro | SONAR Platinum | Pro Tools 12

  9. #109
    Up and Comer
    Join Date
    Aug 2017
    Location
    Washington, DC
    Posts
    2
    Mentioned
    0 Post(s)
    It says the specified account already exists. setup failed 0x80070643 fatal error during installation - you must restart the computer to complete the rollback of software during this rollback the plugin's are kept in x86 and 64bit folder but no console or UAD monitor, software is found. I tried removing all UAD folder from main hard drive(saved all my presets on and external drive so I can reload them hopefully which this issue is resolved. did a C/ hard drive search and removed any files to try and load it all fresh incase and old part of the v9.2 file or files were hiding somewhere and causing a problem. I have a UAD pci express DUO card in my computer and just turning on my Apollo 8 while trying to load the new v9.3

  10. #110
    Up and Comer
    Join Date
    Nov 2016
    Posts
    22
    Mentioned
    0 Post(s)
    Quote Originally Posted by Matt Hepworth View Post
    An impulse can reproduce a single, linear sound accurately. It can't however, reproduce anything that is non-linear. This includes saturation, modulation, speaker breakup, preamp coloration that involves any kind of saturation, any kind of dynamic change, and so forth.

    A speaker doesn't react in a linear way. Convolution cannot capture that. However, even linear convolution provides a representation that can still be hard to distinguish from the real version under some circumstances.

    Indeed, the IR completely miss this dynamic. An IR loader would not be at the level of UAD, it would rather be a dead end. My dream would be that UAD would propose a kind of Sound Machine Cab Works, where we can choose the cabinet, open / closed, size, speakers, their number, type, and also the mic, type, distance, inclination. And that's all!
    exoslime likes this.

Page 11 of 16 FirstFirst ... 789101112131415 ... LastLast

Similar Threads

  1. Welcome to the UAD v9.2 Official Q&A with GK!
    By Matt Hepworth in forum General Discussion
    Replies: 129
    Last Post: 2 Weeks Ago, 10:32 AM
  2. Welcome to the UAD v9.1 Official Q&A with GK!
    By Matt Hepworth in forum General Discussion
    Replies: 213
    Last Post: 3 Weeks Ago, 12:08 PM
  3. Welcome to the UAD v9 Official Q&A with GK!
    By Matt Hepworth in forum General Discussion
    Replies: 115
    Last Post: 16th November 2016, 05:18 PM
  4. Welcome to the UAD v9 Official Q&A with GK!
    By Matt Hepworth in forum Special Event - UAD v9.0 Q&A - API 2500, Chandler Zener, ADA STD-1, Townsend Sphere
    Replies: 102
    Last Post: 4th November 2016, 12:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •